Instructions

Getting Started (Printable Version)

Step 1

Remove the glass cap from the glass reservoir and put the cap on a flat surface. Insert the exposed glass tube of the reservoir into the hole on top of the base. Make sure the tube is fully inserted.

 

Step 2

Add about 10-20 drops of essential oil into the reservoir. The oil level should not be higher than the tips of the fine tubes inside the reservoir. No water is required for this diffuser. Place the cap back to the top of the reservoir after adding essential oil.

Step 3

Connect the USB cable, power adapter to the diffuser base. Plug the power adapter into an electricity outlet. (The USB cable can also be used to connect the diffuser to compatible USB ports to get power, e.g., laptops, external power banks, etc.)

Step 4

Turn the power knob clockwise to power on the diffuser. (A click sound indicates the diffuser is on.) Turn the knob further clockwise to increase the air flow. To reduce the air flow, turn the knob counter-clockwise. To switch off, turn the knob counter-clockwise until you hear a click.